سفارش تبلیغ
صبا ویژن

مقاله Effect of Sonication on Efficiency of Silaneدرmodified Sil

 

برای دریافت پروژه اینجا کلیک کنید

مقاله Effect of Sonication on Efficiency of Silaneدرmodified Silica in Rubber Compounds تحت pdf دارای 7 صفحه می باشد و دارای تنظیمات در microsoft word می باشد و آماده پرینت یا چاپ است

فایل ورد مقاله Effect of Sonication on Efficiency of Silaneدرmodified Silica in Rubber Compounds تحت pdf کاملا فرمت بندی و تنظیم شده در استاندارد دانشگاه و مراکز دولتی می باشد.

این پروژه توسط مرکز مرکز پروژه های دانشجویی آماده و تنظیم شده است

توجه : در صورت  مشاهده  بهم ریختگی احتمالی در متون زیر ،دلیل ان کپی کردن این مطالب از داخل فایل ورد می باشد و در فایل اصلی مقاله Effect of Sonication on Efficiency of Silaneدرmodified Silica in Rubber Compounds تحت pdf ،به هیچ وجه بهم ریختگی وجود ندارد


بخشی از متن مقاله Effect of Sonication on Efficiency of Silaneدرmodified Silica in Rubber Compounds تحت pdf :

سال انتشار: 1390

محل انتشار: هفتمین کنگره ملی مهندسی شیمی

تعداد صفحات: 7

چکیده:

Reinforcing fillers such as silica are often added to rubber to improve its properties and performance. Silica is highly used in tire tread compounds for its known effect on tire performances such as rolling resistance, traction, and wear. The problem of using silica as a reinforcing filler is its highly polar and hydrophilic surface that leads to both poor rubber-filler and strong filler-filler interactions, consequently silica surface should be modified. In this work, threeprecipitated silica were used in a SBR rubber compound: a) Unmodified silica, b) Commercially pretreated silica with silane (TESPT) and c) In-house pretreated silica with silane (TESPT) after Sonication. Compounds were prepared by mixing these silicas and other ingredients withEmulsion Styrene-Butadiene-Rubber (E-SBR) using internal mixer and two-roll-mill. To characterize treatment of silica and its dispersion in the rubber matrix, FTIR and SEM were employed. Cure properties are obtained using a rheometer. Mechanical properties were comparedusing uni-axial tension experiments. Results showed that both treatment methods were successful in providing proper dispersion of silica in SBR matrix. Mechanical behaviour of compounds showed a proper reinforcing effect for both types of used treated silica

 

 

برای دریافت پروژه اینجا کلیک کنید

کلمات کلیدی :